Tempinspect Configuration Tool

Through our software tool you can access more features and freely customize all parameters of you Tempinspect (both single-use and multiuse devices):

• Custom Temperature Monitoring Range
• Custom Sampling Time
• Custom Start Delay
• Input additonal report information
• Enable/disable the multifunction button (to prevent unauthorized device configuration – only START/STOP functionality remains enabled).
• Quickly save/load/write device configurations

Windows
(7, 8 and 10)

Mac OS
(10.7 and later)

Windows 7, 8 and 10

Ensure no Tempinspect device is connected to the computer before starting the installation:

• 1. Download and unzip the installer file.
  2. Right click the tempinspectconftool-win-setup.exe file, and select “Run as Administrator”.
  3. A security warning from Windows may appear. This is normal, as the installer is not yet digitally signed. Continue the installation normally.
  4. Execute the installer and follow the installation instructions.Your antivirus may perform a scan during installation – this is normal.
  5. The necessary USB drivers will be automatically installed together with the software.
  6. Execute the Tempinspect Configuration Tool.
  7. Connect the Tempinspect device to the USB port. Upon connection, a green light will flash shortly on the Tempinspect.
  8. On the Tempinspect Configuration Tool, press Connect. If prompted, press Read.
  9. If needed, check the Quickstart Guide in the Help menu of the application.

Mac OS

• 1. Dowload the DMG file.
  2. Drag the Tempinspect Configuration Tool.app into your Applications folder.
  3. In order to execute the application, you must enable support for third-party applications. Follow Apple’s instructions: link
  4. Connect the Tempinspect device to the computer. Mac OS will automatically provide the necessary drivers.
  5. Execute the Tempinspect Configuration Tool.
  6. If needed, check the Quickstart Guide in the Help menu of the application.